Prepare for the Summer Weather. Contact us for more details. Read More

Skip navigation

Serving the Greater Delaware County

Request Service

24 Hour Service Available

610-623-2789

Serving the Greater Delaware County

24 Hour Service Available

610-623-2789

Request Service

Menu

Walsh Brothers Plumbing and Mechanical Services, Inc. Blog

4 Tips to Fight the Muggy Heat of Summer

When the weather gets warmer, an air conditioner is a savior that helps beat that scorching heat. However, humidity is another problem that comes with the summer season, and it can become quite intolerable. This won’t be an issue if your air conditioning system is working efficiently, as it helps to control the high humidity levels indoors.

If you live in an area with muggy weather, you would probably know what a relief it is when you have an air conditioning system that works efficiently. But there are times when you feel that your AC isn’t removing humidity effectively from your home. Don’t worry about it, as there are ways to help your air conditioning system control that muggy heat. Remember, it is important to consult professionals like the ones at Walsh Brothers Plumbing and Mechanical Services, Inc. when you feel like your AC is not operating well.

How AC works to lower humidity levels

Your air conditioning system regulates humidity by using its evaporator coil, which works to condense water vapors from the air into a liquid which is then collected and drained outside. Having the right unit sizing also makes a lot of difference in providing effective dehumidification.

Ways to make your AC remove humidity efficiently

A little know-how on making your air conditioning system work properly and efficiently is essential. Here are four ways your AC helps keep your home humidity-free.

1. Keeping the evaporator coil clean

The evaporator coil (indoor) installed in your air conditioning system won’t be able to remove the heat and humidity from your home if it is dirty. Ensure that you clean the system’s air filter or even change it when required. If the AC’s air filter is doing its job properly, the coil shouldn’t get dirty. It is due to the dirty air filters that dust or dirt particles build up on the coil. Make sure to opt for a professional AC repair in Springfield, PA, to get the coil cleaned. 

2. Checking the air conditioner’s refrigerant charge

Ensure that the refrigerant charge isn’t too low, or else your AC will struggle to get rid of the humidity. A low refrigerant charge can result in compressor failure or freezing the evaporator coil. These repairs can be pretty costly, and you might even have to replace the entire thing.

3. Adjusting the AC’s fan speed

If you live in a hot and humid climate, your air conditioner is required to move air at a rate of almost 350 CFM per ton. However, some systems are designed to move air faster than the above-mentioned rate, which is not ideal for removing humidity. Adjusting the air conditioner’s fan speed will help you remove the moisture.

4. Installing a TXV (thermal expansion valve)

Getting a TXV installed in the air conditioning system will benefit in removing more humidity from your home. Installing a TXV means that you’re connecting a bulb to the refrigerant line, which opens and closes while improving the capacity of the evaporator coil to remove humidity and, of course, heat.

If you want to regulate the humidity levels in your home, getting in touch with an expert technician can help.

Contact the team at Walsh Brothers Plumbing and Mechanical Services, Inc. Fast-Friendly-Reliable.

Comments are closed.